XSign in by: Email Mobile
扁钢丝 / FLAT STEEL WIRE 汽车遮阳板 帐篷专用钢丝
| Number | Unit-price | Total | |||
| I want to buy： | × | 5.8 | = | 0 |
A new item has been added to your Shopping Cart. You now have items in your Shopping Cart.
Related items
雷德隆REEDRLONM扁钢丝 / FLAT STEEL WIRE 汽车遮阳板 帐篷专用钢丝
材质：优质钢丝
厚度：0.5mm-3mm
宽度：1.5mm-6mm
包装：50kg左右 非标准件 一卷一跟头
内塑外麻
没有现货 需要定做
扁钢丝是采用优质丝径轧扁机轧成扁状钢线，扁钢丝在工业生产中有着极其广泛的用途，如航天航空制导系统和军工用合金扁钢丝，定时器发条，汽车雨刮器骨架及纺织行业大量使用的针布齿条、钢筘及钢片综等纺织器材。
Flat steel wire is rolled into flat steel wire by high quality wire diameter flat mill. Flat steel wire has a wide range of uses in industrial production, such as aerospace guidance system and alloy flat steel wire used in military industry, timer spring, automobile wiper frame and textile equipment such as needle cloth rack, reed and steel sheet comprehensive.
The flat steel wire with large width to thickness ratio and high precision can be obtained by rolling the wire rod with a certain size.
目前，圆钢丝轧扁是制备高精度扁钢丝的主要生产方法之一。早期主要通过冷拔得到扁钢丝，由于用这种方法具有拉拔力大、润滑要求高、模具损失严重等诸多缺点，因此逐步被圆钢丝轧扁工艺所代替。采用轧扁工艺获得的扁钢丝通条性能优越、工艺流程简单、表面质量好、厚度均匀，并且在经过冷加工硬化后可获得很高的抗拉强度。与采用板材分条成扁钢丝相比，具有劳动生产强度低、 单盘重量大以及生产效率高等诸多优点而被广泛采用。
At present, flattening round steel wire is one of the main production methods for producing high precision flat steel wire. In the early stage, the flat steel wire was mainly obtained by cold drawing. Because of the disadvantages of large drawing force, high lubrication requirements, serious mold loss and so on, it was gradually replaced by the flat rolling process of round steel wire. The flat steel wire obtained by the flat rolling process has excellent performance, simple process, good surface quality, uniform thickness, and high tensile strength after cold work hardening. Compared with the flat steel wire, it has many advantages such as low labor production intensity, large single plate weight and high production efficiency.
After the hot rolled wire rod is cold drawn to the specification size, it is softened by recrystallization annealing, then rolled and final heat treatment, and qualified products are obtained. The whole process should go through two heat treatments, the final heat treatment is mainly through oil quenching to obtain martensite strengthening, and then choose different temperature tempering, to obtain the required mechanical properties.
（1）中间热处理过程使工艺复杂，降低生产效率，增加生产成本和劳动力；
（2）经中间热处理后，冷拔过程产生的加工硬化效果完全消失；
（3） 产品的终力学性能受到终热处理过程的限制。
相信专业的力量！
做钢丝我们是认真的！
钢丝请选择雷德隆！
雷德隆与您同行！！！
Believe in professional power!
We are serious about making STEEL WIRE!
Good STEEL WIRE, please choose REEDRLON!
REEDRLON with you toghter! ! !
Update time：
