XSign in by: Email Mobile
厂家速卖通亚马逊打商标标签吊牌枪PP塑料胶针服装辅料挂线绳现货
| 101 Gun +6.5cm 5000 Hair(101枪+6.5厘米5000发) | ¥16.6 | 9992 table available |
|
| 101 Gun +3.5cm 5000 Hair(101枪+3.5厘米5000发) | ¥15.0 | 9981 table available |
|
| 101 Gun +1cm 5000 Hair(101枪+1厘米5000发) | ¥14.8 | 9608 table available |
|
| 101 Gun +10cm 5000 Hair(101枪+10厘米5000发) | ¥22.0 | 9948 table available |
|
| 101 Gun +1.2cm 5000 Hair(101枪+1.2厘米5000发) | ¥14.8 | 9995 table available |
|
| 101 single Gun(101单独一把枪) | ¥12.0 | 8479 table available |
|
| 101 Gun +7.5cm 5000 Rounds(101枪+7.5厘米5000发) | ¥16.6 | 9995 table available |
|
| 101 Gun +1.5cm 5000 Rounds(101枪+1.5厘米5000发) | ¥14.8 | 9930 table available |
|
| 101 Gun +12.5cm 5000 Hair(101枪+12.5厘米5000发) | ¥22.0 | 9995 table available |
|
| 101 Gun +2.5cm 5000 Hair(101枪+2.5厘米5000发) | ¥15.0 | 9986 table available |
|
| 101 Gun +3cm 5000 Hair(101枪+3厘米5000发) | ¥15.0 | 9968 table available |
|
| 101 Gun +2cm 5000 Hair(101枪+2厘米5000发) | ¥14.8 | 9964 table available |
|
| 101 Gun +5cm 5000 Hair(101枪+5厘米5000发) | ¥15.6 | 8896 table available |
|
A new item has been added to your Shopping Cart. You now have items in your Shopping Cart.
Related items
101工业级吊牌枪： 全系配套总共3个钢针头
针头：针头全长3.5厘米
搭配：套餐配套5000发胶针 适合于 速卖通 亚马逊 销售。
Tagging Gun
标签枪
Tag Fasteners Installation
紧固件的安装
Step 1:Grip the gun handle
第一步：握紧枪柄
Step 2: Insert either end of the tag pin connecting bar (T letter port) into the hole at top of the gun, push the pin into the slot as far as it will go on
步骤2：将标签销连接杆（T字母端口）的任一端插入枪顶部的孔中，将销尽可能地推入槽中。
Step 3: Release the handle,finish and begin use
步骤3：松开手柄，完成并开始使用
Needle Installation
打捆针安装
Step 1: Set the white switch to 3 o'clock
步骤1：将白色开关设置为3点钟
Step 2: Keep the needle slot and gun slot on the same horizontal line and insert
第二步：将针槽和枪槽保持在同一水平线上并插入
Step 3:Set the white switch to 9 o'clock finish and begin to use
步骤3：将白色开关设置为9点钟结束并开始使用
Attantion:
注意：
1.When not use,protect the needle by the covering cap.
1.不使用时，用盖帽保护针。
2.Before taking out the tag pin,please grip the gun handle firstly,then take it out.Otherwise,it may damage the fittings in the gun
2.在取出标签销之前，请先抓住枪柄，然后取出，否则会损坏枪内配件
Update time：
