XSign in by: Email Mobile
厂家批发止吠器 宠物用品止吠器 遥控训狗器 lcd练习训狗器
| Number | Unit-price | Total | |||
| I want to buy： | × | 135.0 | = | 0 |
A new item has been added to your Shopping Cart. You now have items in your Shopping Cart.
产品描述: 本产品是通过遥控震动来完成止吠的功能,同时备有声音指令. 摇控止吠项圈是目前世界上唯一人道的、安全高效的宠物训导用数码电子产品。它由主人摇控器和无线电接收项圈组成，接收项圈带在宠物颈部，受主人摇控器控制，接收项圈产生高频振动。 高频振动是用振动干扰宠物的现行又绝无伤害，对于制止爱犬乱叫和不当行为有着令人惊奇的效果，振动干扰成功后主人要及时告诉爱犬不应该做的，经多次训导，狗狗的不良行为就会明显减少，遥控口哨声响用于传达主人的指示，经过训练，特定的哨声响可以令狗狗明白主人的指令。
此产品包含：
1，控制手机一个 43.5克
2，接收器一个 48克
3，狗带一条 22.5克
4，控制手机电池一对 20克
5，接收器电池 一对 13克
6，接触配件一包 8克
7，英文说明书一份 2.5克
8，吸塑一个 15克
9，彩盒一个 53.5克 彩盒规格：17x13.5x4.5cm 0.25kgs/pc
一套产品是226克 50套装一箱 外箱规格是470*405*326MM 净重：11.3KG 毛重：12.28KG
Remote Training System with LCD display
Features:
1. 100 levels of vibration.
2. 100 levels of static (optional).
3. The levels can be altered by use of up & down button.
4. A tone button activates a tone on the receiver.
5. This system is used for only 1 receiver.
6. The receiver will TURN OFF if it is unused for 4 minutes.
7. Any movement will activate the receiver into STANDBY MODE.
8. The transmitter will go into STANDBY MODE if there is no operation after 20 seconds and turn off after 2 minute.
9. Adjustable belt length, maximum length up to 18inches, two pairs of metal prong (short/long) to suit dogs with varied fur thickness.
User Manual for Transmitter:
1. To install the batteries, open the battery cover, which is at the back of the transmitter.
2. Install the battery (2 x 4LR44/ 6V) in the transmitter and ensure the polarity is correct.
3. The transmitter will be TURN ON automatically.
4. Press the buttons one by one - the LCD images will change.
5. Press the up and down buttons on right hand side to set level. .
6. The LED light can be used for giving training signals.
7. The transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.
8. In STANDBY MODE, press any button (except LED light button) to wake it up.
9. To TURN ON the transmitter, hold mode button for at least 5 seconds.
User Manual for the Receiver and Code:
1.To install the batteries
2.Remove the cover
3.Install the batteries (2xAAA 1.5V), make sure the polarity is correct
4.There is a beep right after installing the batteries in the receiver
5.Go to the transmitter and choose 1 or 2 channel to encode by pressing the channel button 1/2 in the transmitter
6.Then press the LAUNCH button on transmitter immediately
7.The receiver will beep - it is now encoded to the transmitter
8.Replace cover and tighten metal probes
1 x remote control unit
1 x collar
1 x test light
1 x Operating Instructions
2 x 1.5V AAA batteries
2 x 4LR44 6V batteries
Update time：
